ENGINE HOOD COURTESY SWITCH INSPECTION


  1. INSPECT HOOD LOCK ASSEMBLY


    1. A01FVJCE01
      Text in Illustration
      *a UNLOCK
      *b LOCK
      *c

      Component without harness connected

      (Hood Lock Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Unlock position Below 1 Ω
      1 - 2 Lock position 10 kΩ or higher

      If the result is not as specified, replace the hood lock assembly.