ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) INSTALLATION


  1. INSTALL ELECTRICAL KEY ANTENNA


    1. Install the electrical key antenna with the 2 nuts.

    2. Connect the connector.

  2. INSTALL REAR BUMPER ENERGY ABSORBER


    1. Install the rear bumper energy absorber.

  3. INSTALL REAR BUMPER COVER


    1. w/ LEXUS Parking Assist-sensor System:


      1. Connect the connector of the No. 3 luggage room wire.

    2. Attach the 20 claws to install the rear bumper cover.

    3. Install the 2 screws.

    4. Install the screw, and then install the rear bumper seal bracket.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

    5. Install the 4 clips and 2 screws.

  4. INSTALL NO. 1 REAR BUMPER PLATE


    1. Attach the 2 claws to install the rear bumper No. 1 plate.