ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) REMOVAL


  1. REMOVE NO. 1 REAR BUMPER PLATE


    1. A01FR8VE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the rear bumper No. 1 plate.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE REAR BUMPER COVER


    1. A01FQOQ

      Remove the 4 clips and 2 screws.

    2. A01FS8V

      Remove the screw, and then remove the rear bumper seal bracket.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

    3. A01FRHU

      Remove the 2 screws.

    4. A01FS1CE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper cover.

    5. Detach the 20 claws and remove the rear bumper cover.

    6. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector of the No. 3 luggage room wire.

        A01FQ64

  3. REMOVE REAR BUMPER ENERGY ABSORBER


    1. Remove the rear bumper energy absorber.

      A01FS5TE01
      Text in Illustration
      *A for Type A *B for Type B

  4. REMOVE ELECTRICAL KEY ANTENNA


    1. A01FQSX

      Disconnect the connector.

    2. Remove the 2 nuts and electrical key antenna.