REAR DOOR LOCK INSPECTION
-
INSPECT REAR DOOR LOCK ASSEMBLY LH (w/o Double Locking System)
Text in Illustration *a Lock *b Unlock *c Component without harness connected
(Rear Door Lock assembly LH)
- -
-
Check the door lock motor operation.
-
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
OK Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)
Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)
Unlock
-
If the result is not as specified, replace the rear door lock assembly LH.
-
-
-
Check the detection switch.
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance Tester Connection Switch Condition Specified Condition 6 (LSSR) - 9 (E) Unlock Below 1 Ω 6 (LSSR) - 9 (E) Lock 10 kΩ or higher
-
If the result is not as specified, replace the rear door lock assembly LH.
-
-
-
-
INSPECT REAR DOOR LOCK ASSEMBLY LH (w/ Double Locking System)
Text in Illustration *a Lock *b Unlock *c Component without harness connected
(Rear Door Lock Assembly LH)
- -
-
Check the door lock motor operation.
-
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
OK Measurement Condition Specified Condition Battery positive (+) → 2 (L)
Battery negative (-) → 1 (UL)
Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 2 (L)
Unlock Battery positive (+) → 4 (DL)
Battery negative (-) → 3 (UNDL)
Set Battery positive (+) → 3 (UNDL)
Battery negative (-) → 4 (DL)
Unset
-
If the result is not as specified, replace the rear door lock assembly LH.
-
-
-
Check the detection switch.
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance Tester Connection Switch Condition Specified Condition 6 (LSSR) - 9 (E) Unlock Below 1 Ω 6 (LSSR) - 9 (E) Lock 10 kΩ or higher
-
If the result is not as specified, replace the rear door lock assembly LH.
-
-
-
-
INSPECT REAR DOOR LOCK ASSEMBLY RH (w/o Double Locking System)
Text in Illustration *a Unlock *b Lock *c Component without harness connected
(Rear Door Lock Assembly RH)
- -
-
Check the door lock motor operation.
-
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
OK Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)
Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)
Unlock
-
If the result is not as specified, replace the rear door lock assembly RH.
-
-
-
Check the detection switch.
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance Tester Connection Switch Condition Specified Condition 9 (LSSR) - 6 (E) Unlock Below 1 Ω 9 (LSSR) - 6 (E) Lock 10 kΩ or higher
-
If the result is not as specified, replace the rear door lock assembly RH.
-
-
-
-
INSPECT REAR DOOR LOCK ASSEMBLY RH (w/ Double Locking System)
Text in Illustration *a Unlock *b Lock *c Component without harness connected
(Rear Door Lock Assembly RH)
- -
-
Check the door lock motor operation.
-
Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.
OK Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 3 (UL)
Lock Battery positive (+) → 3 (UL)
Battery negative (-) → 4 (L)
Unlock Battery positive (+) → 2 (DL)
Battery negative (-) → 1 (UNDL)
Set Battery positive (+) → 1 (UNDL)
Battery negative (-) → 2 (DL)
Unset
-
If the result is not as specified, replace the rear door lock assembly RH.
-
-
-
Check the detection switch.
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance Tester Connection Switch Condition Specified Condition 9 (LSSR) - 6 (E) Unlock Below 1 Ω 9 (LSSR) - 6 (E) Lock 10 kΩ or higher
-
If the result is not as specified, replace the rear door lock assembly RH.
-
-
-