BLIND SPOT MONITOR SENSOR REMOVAL


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH

    Note


    • Avoid any impact to the blind spot monitor sensor LH.

    • Do not drop the blind spot monitor sensor LH. If it is dropped, replace it with a new one.


    1. A01FT2Y

      Detach the 2 clamps.

    2. Remove the 3 nuts.

    3. A01FSR1

      Disconnect the connector and remove the blind spot monitor sensor LH.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH

    Tech Tips

    Use the same procedure described for the LH side.