ULTRASONIC SENSOR (for Front Side) REMOVAL


  1. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  2. REMOVE NO. 4 ENGINE ROOM WIRE


    1. Disconnect the 4 connectors.

      A01FTLWE01

    2. for Sport Package:

      Detach the 10 clamps and remove the No. 4 engine room wire.

    3. except Sport Package:

      Detach the 11 clamps and remove the No. 4 engine room wire.

      Text in Illustration
      *A for Sport Package *B except Sport Package

  3. REMOVE NO. 1 ULTRASONIC SENSOR


    1. A01FVG5

      Detach the 2 claws and remove the No. 1 ultrasonic sensor.

      Tech Tips


      • The illustration shows the No. 1 ultrasonic sensor for the RH corner . The horizontal orientation of the No. 1 ultrasonic sensor for the LH corner is opposite that of the image shown in the illustration.

      • Use the same procedure for all No. 1 ultrasonic sensors.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01FRHG

      Remove the No. 1 ultrasonic sensor retainer from the front bumper cover.

    2. Remove the old double-sided tape from the front bumper cover.

      Tech Tips


      • The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner and front sensor retainer LH. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner and front sensor retainer RH is opposite that of the image shown in the illustration.

      • Use the same procedure for all No. 1 ultrasonic sensor retainers.

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER


    1. A01FRHG

      Remove the No. 2 ultrasonic sensor retainer from the front bumper cover.

    2. Remove the old double-sided tape from the front bumper cover.

      Tech Tips


      • The illustration shows the No. 2 ultrasonic sensor retainer for the front sensor retainer LH. The vertical orientation of the No. 2 ultrasonic sensor retainers for the front sensor retainer RH is opposite that of the image shown in the illustration.

      • Use the same procedure for all No. 2 ultrasonic sensor retainers.

  6. REMOVE ULTRASONIC SENSOR CLIP (for Corner Sensor)


    1. A01FQGKE02
      Text in Illustration
      *1 Protective Tape

      for LH Side:

      Using a screwdriver, detach the claw and remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor.

      Tech Tips

      Tape the screwdriver tip before use.