BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1ABB
| DTC Code | DTC Name |
|---|---|
| C1ABB | Blind Spot Monitor Master Module Beam Axis Inspection Incomplete |
DESCRIPTION
This DTC is stored when a beam axis inspection has not been performed for the blind spot monitor sensor RH.
Tech Tips
This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that beam axis inspection is performed. Completing the beam axis inspection after replacing a blind spot monitor sensor prevents this DTC from being output.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1ABB | A beam axis inspection has not been performed. | Blind spot monitor sensor RH |
INSPECTION PROCEDURE
PROCEDURE
-
PERFORM BEAM AXIS INSPECTION
-
Perform beam axis inspection using the GTS Click here.
NEXT 
END
-