BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB7

DTC Code DTC Name
C1AB7 Blind Spot Monitor Slave Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC Code DTC Detection Condition Trouble Area
C1AB7 The blind spot monitor sensor LH (slave) detects an internal malfunction. Blind spot monitor sensor LH

INSPECTION PROCEDURE

Note

When checking for DTCs, make sure that the blind spot monitor main switch (integration control and panel assembly) is on.

PROCEDURE


  1. CHECK DTC


    1. Clear the DTCs Click here.

    2. Recheck for DTCs and check if the same DTC is output again Click here.

      OK
      DTC C1AB7 is not output.

    NG

    REPLACE BLIND SPOT MONITOR SENSOR LH Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here