ULTRASONIC SENSOR (for Rear Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01FUT0E01
      Text in Illustration
      *a Keyhole
      *b Slit

      for RH Corner Side:

      Attach the 4 claws and install the No. 1 ultrasonic sensor retainer to the rear bumper cover.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

    2. A01FTOZE01
      Text in Illustration
      *a Keyhole
      *b Slit

      except RH Corner Side:

      Attach the 4 claws and install the No. 1 ultrasonic sensor retainer to the rear bumper cover.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

  2. INSTALL ULTRASONIC SENSOR CLIP


    1. A01FV06

      Attach the claw to install the ultrasonic sensor clip to the No. 1 ultrasonic sensor.

      Tech Tips


      • The illustration shows the No. 1 ultrasonic sensor for the RH corner. The installation position of the No. 1 ultrasonic sensor clip for the LH corner and back sensor LH and RH is on the opposite side.

      • Use the same procedure for all ultrasonic sensor clips.

  3. INSTALL NO. 1 ULTRASONIC SENSOR


    1. Attach the 2 claws to install the ultrasonic sensor assembly to the No. 1 ultrasonic sensor retainer.

      Tech Tips

      Use the same procedure for all ultrasonic sensors.

  4. INSTALL NO. 3 LUGGAGE ROOM WIRE


    1. Attach the 4 clamps to install the No. 3 luggage room wire.

    2. Connect the 4 ultrasonic sensor connectors.

  5. INSTALL REAR BUMPER COVER

    Click here