ULTRASONIC SENSOR (for Rear Side) REMOVAL


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE NO. 3 LUGGAGE ROOM WIRE


    1. Disconnect the 4 connectors.

      A01FRE1

    2. Detach the 4 clamps and remove the No. 3 luggage room wire.

  3. REMOVE NO. 1 ULTRASONIC SENSOR


    1. A01FSIME04
      Text in Illustration
      *A for Corner RH Side
      *B for Other Side

      Detach the 2 claws and remove the No. 1 ultrasonic sensor.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01FRHG

      Remove the No. 1 ultrasonic sensor retainer from the front bumper cover.

    2. Remove the old double-sided tape from the front bumper cover.

      Tech Tips


      • The illustration shows the No. 1 ultrasonic sensor retainer for the LH corner and back sensor retainer. The vertical orientation of the No. 1 ultrasonic sensor retainer for the corner sensor retainer RH is opposite that of the image shown in the illustration.

      • Use the same procedure for all No. 1 ultrasonic sensor retainers.

  5. REMOVE ULTRASONIC SENSOR CLIP

    Tech Tips

    Use the same procedure for all ultrasonic sensor clips.


    1. A01FQGK
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the claw and remove the ultrasonic sensor clip from the No. 1 ultrasonic sensor.

      Tech Tips

      Tape the screwdriver tip before use.