BLIND SPOT MONITOR SYSTEM PROBLEM SYMPTOMS TABLE

Tech Tips


  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Symptom Suspected Area See page
System does not operate at all Proceed to "Power source circuit"

Click here

Proceed to "Main switch circuit"

Click here

Blind spot monitor sensor RH

Click here

System can not be turned off Proceed to "Main switch circuit"

Click here

Blind spot monitor sensor RH

Click here

Outer rear view mirror indicator RH does not illuminate Blind spot monitor beam axis inspection

Click here

Outer mirror RH

Click here

Outer rear view mirror assembly RH

Click here

Blind spot monitor sensor RH

Click here

Outer rear view mirror indicator LH does not illuminate Blind spot monitor beam axis inspection

Click here

Outer mirror LH

Click here

Outer rear view mirror assembly LH

Click here

Blind spot monitor sensor LH

Click here

Outer rear view mirror indicator RH remains illuminated Blind spot monitor beam axis inspection

Click here

Blind spot monitor sensor RH

Click here

Outer rear view mirror indicator LH remains illuminated Blind spot monitor beam axis inspection

Click here

Blind spot monitor sensor LH

Click here

Outer rear view mirror indicator RH does not flash Outer mirror RH

Click here

Blind spot monitor sensor RH

Click here

Outer rear view mirror indicator LH does not flash Outer mirror RH

Click here

Blind spot monitor sensor LH

Click here

Outer rear view mirror indicator RH continues to flash Blind spot monitor sensor RH

Click here

Outer rear view mirror indicator LH continues to flash Blind spot monitor sensor LH

Click here

The blind spot monitor warning message in the meter remains illuminated Check abnormally history

Click here

Proceed to "Power Source Circuit"

Click here

Blind spot monitor sensor RH

Click here

Blind spot monitor sensor LH

Click here

Combination meter assembly

Click here

The blind spot monitor warning message in the meter does not illuminate even if the blind spot monitor detects a malfunction Proceed to "Power Source Circuit"

Click here

Blind spot monitor sensor RH

Click here

Blind spot monitor sensor LH

Click here

Combination meter assembly

Click here