DESCRIPTION
This DTC is stored if the multi-media module receiver assembly receives a signal via CAN communication from the rear steering control ECU that indicates an internal malfunction.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C165A | Rear steering control ECU malfunction |
|
INSPECTION PROCEDURE
Note
When "System initializing" is displayed on the accessory meter assembly (for 12.3 Inch) or multi-display (for 8 Inch) after disconnecting the cable from the negative (-) auxiliary battery terminal, correct the steering angle neutral point Click here.
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.
PROCEDURE
REPLACE REAR STEERING CONTROL ECU
Replace the rear steering control ECU Click here.
| NEXT |
|
CHECK DTC OUTPUT
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC C165A is output | A |
| No DTC is output | B |
| B |
|
END (REAR STEERING CONTROL ECU IS DEFECTIVE) |
| A |
|
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here