MAYDAY SWITCH INSTALLATION


  1. INSTALL MAP LIGHT ASSEMBLY


    1. Connect the 2 connectors.

    2. Attach the 4 clips and 2 guides to install the map light assembly.

  2. INSTALL FRONT ROOF TOP GARNISH

    A01FUEXE01

    1. w/ Night View System:


      1. While being careful not to apply force to the camera, attach the 6 claws, guide and fastener to install the front roof top garnish.

        Text in Illustration
        *1 Guide
        *2 Fastener

        Note

        When removing and installing the front roof top garnish, do not apply force to the camera sensor located at (x).

    2. w/o Night View System:


      1. While being careful not to apply force to the camera (for vehicles with the lane keeping assist system), attach the 6 claws and guide to install the front roof top garnish.

        Note

        w/ Lane Keeping Assist System:

        When removing and installing the front roof top garnish, do not apply force to the camera sensor located at (x).

        A01FVEYE01
        Text in Illustration
        *A for Standard *B w/ Rain Sensor
        *C w/ Lane Keeping Assist System - -

  3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover LH.

  5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.