INSTALL TELEPHONE BRACKET
Install the telephone bracket with the 2 bolts.
INSTALL NO. 1 TELEPHONE BRACKET
Install the No. 1 telephone bracket with the bolt.
INSTALL TELEMATICS TRANSCEIVER WITH BRACKET
Connect all the connectors.
Install the telematics transceiver with the 3 bolts.
Tech Tips
Tighten the bolts in the order shown in the illustration.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
| *1 | Screw <A> |
| *2 | Bolt <E> |
Connect the connectors and attach the clamp.
Attach the 6 clips to install the glove compartment door assembly.
Install the 3 screws <A> and 2 bolts <E>.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Connect the connectors and attach the clamp.
Attach the 5 clips and 2 guides to install the No. 2 instrument panel under cover sub-assembly.
INSTALL INSTRUMENT SIDE PANEL RH
w/ Airbag Cut Off Switch:
Connect the connector.
Attach the 7 clips to install the instrument side panel RH.
INSTALL FRONT DOOR OPENING TRIM COVER RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
Attach the 5 clips and 2 guides to install the instrument panel finish panel end RH.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL
Connect the connector.
Attach the 9 clips and guide to install the center instrument cluster finish panel.
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
Install the luggage compartment trim cover LH.
INSTALL LUGGAGE COMPARTMENT FLOOR MAT
Install the luggage compartment floor mat.
CHECK SRS WARNING LIGHT
REGISTRATION TELEMATICS TRANSCEIVER
When replacing the multi-media module receiver assembly or telematics transceiver, perform the vehicle contract setting Click here.