G-BOOK SYSTEM (w/ Telematics Transceiver), Diagnostic DTC:B15EE

DESCRIPTION

If an unauthorized contract flag is stored by the G-BOOK device, this DTC will be stored.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CONTRACT FLAG

   
   

   1. 

      Enter diagnostic mode Click here.

   2. Select "Service Information" on the Service Menu screen.

   3. 

      Select "G-BOOK Information for Contract" on the Service Information screen.

   4. 

      Check if the flag information shown in the illustration indicates "1".

      Result

      Result	Proceed to
      "1" is not indicated.	A
      "1" is indicated.	B

   
   

   B

   MANUAL MAINTENANCE CHECK Click here

   A

2. PERFORM OPERATION

   
   

   1. Perform "Download necessary data" again.

      

      
      

      1. Perform the operations shown in the illustration and select "Download necessary data".

         Tech Tips

         The screen illustrations provided are samples only and may be different from actual screens.

   
   

   NEXT

3. MANUAL MAINTENANCE CHECK

   
   

   1. Move the vehicle to a communication service area. Wait for a while and perform a manual maintenance check Click here.

      Result

      Result	Proceed to
      Manual maintenance check completes normally.	A
      Manual maintenance check does not complete normally.	B

      Tech Tips

      If the manual maintenance check completes normally, clear history DTCs (this problem was caused by DTCs stored due to past environmental factors).

   
   

   B

   CONTACT G-BOOK SUPPORT CENTER Click here

   A

   END

4. CONTACT G-BOOK SUPPORT CENTER

   
   

   1. Contact the G-BOOK support center and inform them about the following.

      
      

      • Flag information is either "1" or "0".

      • The manual maintenance check did not complete normally.

      Tech Tips

      The G-BOOK support center will perform an investigation and provide the results.

   
   

   NEXT

   FOLLOW INSTRUCTIONS PROVIDED BY G-BOOK SUPPORT CENTER