REMOTE TOUCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL REMOTE TOUCH ASSEMBLY


    1. A01FU6S

      Move the remote touch assembly in the direction of the arrow in the illustration and set it on the upper console panel.

    2. Attach the 9 claws to install the remote touch assembly.

  2. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel cup holder assembly.

  3. INSTALL UPPER CONSOLE PANEL

    A01FVW3E01
    Text in Illustration
    *1 Upper Console Panel
    *2 Upper Rear Console Panel Sub-assembly
    *3 Remote Touch Assembly

    1. Connect the connectors and attach the clamp.

    2. Attach the 9 clips to install the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.

    3. Install the 2 screws.

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

    2. Attach the claw to install the shifting hole cover.

      A01FQZFE01
      Text in Illustration
      *1 Shifting Hole Cover - -

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 5 clips and 2 guides to install the instrument panel finish panel end LH.

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Attach the 5 clips and 2 guides to install the instrument panel finish panel end RH.

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. Connect the connector.

    2. Attach the 9 clips and guide to install the center instrument cluster finish panel.