NAVIGATION SYSTEM TERMINALS OF ECU


  1. MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    A01FTPAE05
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N66-7 (GND2) - N68-12 (GND1) W-B - W-B Ground Always Below 1 V
    N66-11 (ACC) - N68-12 (GND1) G - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    N66-12 (+B) - N68-12 (GND1) L - W-B Power source Always 11 to 14 V
    N68-1 (CANH) B CAN communication signal - -
    N68-2 (CANL) W CAN communication signal - -
    N68-3 (CNH1) L Local Bus communication signal - -
    N68-4 (CNL1) LG Local Bus communication signal - -
    N68-10 (VMTF) - N68-12 (GND1) Y - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
    N68-12 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
    N68-13 (ILL-) - N68-12 (GND1) W - W-B Illumination signal Power switch on (IG), light control switch off → tail or head (Light intensity is not max. or min.) Below 1 V → Pulse generation
    N68-14 (ILL+) - N68-12 (GND1) G - W-B Illumination signal Power switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N68-15 (IG) - N68-12 (GND1) L - W-B Power source (IG) Power switch on (IG) 11 to 14 V
    Power switch off Below 1 V
    N68-16 (ACC1) - N68-12 (GND1) GR - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    N68-17 (+B1) - N68-12 (GND1) L - W-B Power source Always 11 to 14 V
    N68-18 (V+) - N68-19 (V-) R - W Television camera image signal Power switch on (IG), reverse (R) selected, camera lens not covered, displaying an image Pulse generation (Refer to waveform 1)
    Power switch on (IG), reverse (R) selected, camera lens covered, blacking out screen Pulse generation (Refer to waveform 2)
    N68-19 (V-) - N68-12 (GND1) W - W-B Ground Always Below 1 V
    N68-24 (TX2+) P AVC-LAN communication signal - -
    N68-25 (TX2-) R AVC-LAN communication signal - -
    N68-27 (MIN+) - N68-12 (GND1)

    Y - W-B*1

    W - W-B*2

    		 Microphone voice signal

    See "Microphone & Voice Recognition Check" in Operation Check Click here

    		-
    N68-28 (SGND) - N68-12 (GND1) Shield - W-B Shield ground Always Below 1 V
    H68-29 (MACC) - N68-12 (GND1)*2 B - W-B Telephone microphone assembly power supply Power switch off Below 1 V
    Power switch on (ACC) 4 to 6 V
    N68-30 (SW1) - N68-32 (SWG) Y - LG Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
    Seek+ switch pushed 0.45 to 0.65 V
    Seek- switch pushed 1.19 to 1.49 V
    Vol+ switch pushed 2.09 to 2.54 V
    Vol- switch pushed 3.2 to 3.88 V
    N68-31 (SW2) - N68-32 (SWG) R - LG Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
    MODE switch pushed 0.45 to 0.65 V
    On hook switch pushed 1.19 to 1.49 V
    Off hook switch pushed 2.09 to 2.54 V
    Voice switch pushed 3.2 to 3.88 V
    N68-32 (SWG) - Body ground LG - Body ground Steering pad switch signal Always Below 1 V
    N68-39 (CA+) - N68-12 (GND1) B - W-B Television camera power supply Power switch on (IG), reverse (R) selected 5.5 to 7.05 V
    N68-40 (CGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
    N68-45 (TX3+) L AVC-LAN communication signal - -
    N68-46 (TX3-) LG AVC-LAN communication signal - -
    N68-48 (MIN-) - Body ground

    BR - Body ground*1

    R - Body ground*2

    		 Microphone voice signal

    See "Microphone & Voice Recognition Check" in Operation Check Click here

    		-
    N68-49 (SNS2) - N68-12 (GND1) B - W-B Microphone connection detection signal Always Below 1 V
    N68-56 (SPD) - N68-12 (GND1) SB - W-B Speed signal from combination meter assembly

    See "Vehicle Signal Check Mode" in Operation Check Click here

    		-
    N69-5 (AGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
    N69-7 (VAR+) - N69-15 (VA-) W - R Sound signal (Right) AUX audio device playing (When stereo jack adapter used) A waveform synchronized with sound is output.
    N69-8 (VAL+) - N69-15 (VA-) B - R Sound signal (Left) AUX audio device playing (When stereo jack adapter used) A waveform synchronized with sound is output.
    N69-15 (VA-) - N68-12 (GND1) R - W-B Sound signal ground Always Below 1 V
    N69-16 (ADPG) - N68-12 (GND1) Y - W-B External device connector detection signal External device connected Below 1 V
    External device not connected 2.1 to 3 V
    N138-1 - N68-12 (GND1) W - W-B MOST communication signal Power switch on (ACC) 4.5 V or higher
    Power switch off Below 1 V
    N138-2 B MOST communication signal - -
    N138-3 B MOST communication signal - -
    N138-4 - N68-12 (GND1) Shield - W-B Shield ground Always Below 1 V
    N138-5 B MOST communication signal - -
    N138-6 B MOST communication signal - -
    N138-7 - N68-12 (GND1) Shield - W-B Shield ground Always Below 1 V
    N148-1 (USV1) R Power source - -
    N148-2 (US1-) V Data signal - -
    N148-3 (US1+) BR Data signal - -
    N148-4 (UGD1) B Ground - -
    N148-5 (UESS) Shield Shield ground - -
    N145-1-1 (USB-)*1 B USB communication line - -
    N145-1-2 (USB+)*1 B USB communication line - -
    N145-1-3 (USBS) - Body ground*1 B - Body ground Shield ground Always Below 1 V
    N145-2 (USBG) - Body ground*1 W - Body ground Shield ground Always Below 1 V
    N145-3 (VOT+) - N68-12 (GND1)*1 W - W-B Sent voice signal Destination assist service in use and vehicle occupant speaking to operator A waveform synchronized with the sent voice is output.
    N145-4 (USBV) - N68-12 (GND1)*1 W - W-B Telematics transceiver power supply Power switch on (ACC) 4.75 to 5.25 V
    Power switch off Below 1 V
    N145-5 (VOT-) - N68-12 (GND1)*1 R - W-B Sent voice signal Destination assist service in use and vehicle occupant speaking to operator A waveform synchronized with the sent voice is output.
    N145-6 (VOR-) - N68-12 (GND1)*1 B - W-B Receive voice signal Destination assist service in use and operator speaking to vehicle occupant A waveform synchronized with the received voice is output.
    N145-7 (VOR+) - N68-12 (GND1)*1 G - W-B Receive voice signal Destination assist service in use and operator speaking to vehicle occupant A waveform synchronized with the received voice is output.

    • *1: w/ Emergency Call Switch

    • *2: w/o Emergency Call Switch


    1. A01FT9CE20
      Text in Illustration
      *a Waveform 1 (camera lens is not covered, displaying an image)
      *b Waveform 2 (camera lens is covered, blacking out the screen)
      *c Synchronization Signal
      *d Video Waveform

      Reference (Oscilloscope waveform):


      1. Waveform 1 (camera lens is not covered, displaying an image)

        Item Content
        Measurement terminal N68-18 (V+) - N68-19 (V-)
        Measurement setting 200 mV/DIV., 50 μs/DIV.
        Condition Power switch on (IG), reverse (R) selected, camera lens is not covered, displaying an image

        Tech Tips

        The video waveform changes according to the image from the rear television camera assembly.

      2. Waveform 2 (camera lens is covered, blacking out the screen)

        Item Content
        Measurement terminal N68-18 (V+) - N68-19 (V-)
        Measurement setting 200 mV/DIV., 50 μs/DIV.
        Condition Power switch on (IG), reverse (R) selected, camera lens is covered, blacking out screen

        Tech Tips

        The video waveform changes according to the image from the rear television camera assembly.

  2. ACCESSORY METER ASSEMBLY (for 12.3 Inch)

    A01FSB5E09
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N62-2 (ILL) - N62-13 (GND1) G - W-B Illumination signal Power switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N62-6 (TX1+) B AVC-LAN communication signal - -
    N62-7 (TX+) L AVC-LAN communication signal - -
    N62-11 (VMTI) - N62-13 (GND1) Y - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
    N62-12 (+B2) - N62-13 (GND1) SB - W-B Power source Always 11 to 14 V
    N62-13 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
    N62-15 (WUI) Y Local Bus communication signal - -
    N62-16 (WUO) B Local Bus communication signal - -
    N62-18 (TX1-) W AVC-LAN communication signal - -
    N62-19 (TX-) LG AVC-LAN communication signal - -
    N62-23 (IG) - N62-13 (GND1) LG - W-B Power source (IG) Power switch on (IG) 11 to 14 V
    Power switch off Below 1 V
    N62-24 (ACC) - N62-13 (GND1) GR - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V

  3. MULTI-DISPLAY (for 8 Inch)

    A01FSB5E10
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N155-2 (ILL) - N155-13 (GND1) G - W-B Illumination signal Power switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N155-6 (TX1+) B AVC-LAN communication signal - -
    N155-7 (TX+) L AVC-LAN communication signal - -
    N155-11 (VMTI) - N155-13 (GND1) Y - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
    N155-12 (+B2) - N155-13 (GND1) SB - W-B Power source Always 11 to 14 V
    N155-13 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
    N155-15 (WUI) Y Local Bus communication signal - -
    N155-16 (WUO) B Local Bus communication signal - -
    N155-18 (TX1-) W AVC-LAN communication signal - -
    N155-19 (TX-) LG AVC-LAN communication signal - -
    N155-23 (IG) - N155-13 (GND1) LG - W-B Power source (IG) Power switch on (IG) 11 to 14 V
    Power switch off Below 1 V
    N155-24 (ACC) - N155-13 (GND1) GR - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V

  4. REMOTE TOUCH

    A01FSVVE01
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    N60-1 (+B) - N60-15 (GND) P - W-B Power source Always 11 to 14 V
    N60-2 (ACC) - N60-15 (GND) GR - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    N60-4 (MO-) LG Local Bus communication signal - -
    N60-5 (MO+) L Local Bus communication signal - -
    N60-9 (ILL+) - N60-15 (GND) G - W-B Illumination signal Power switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
    N60-12 (MI-) Y Local Bus communication signal - -
    N60-13 (MI+) B Local Bus communication signal - -
    N60-15 (GND) - Body ground W-B - Body ground Ground Always Below 1 V
    N60-16 (ILL-) - N60-15 (GND) W - W-B Illumination signal Power switch on (IG), light control switch off → tail or head position (Light intensity is not max. or min.) Below 1 V → Pulse generation

  5. STEREO COMPONENT AMPLIFIER ASSEMBLY Click here

  6. TELEMATICS TRANSCEIVER (w/ Emergency Call Switch) Click here