Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
INSTALL REAR NO. 2 SPEAKER ASSEMBLY
Attach the clip to install the rear No. 2 speaker assembly.
Note
Do not touch the cone of the speaker.
Connect the connector.
INSTALL REAR SPEAKER ASSEMBLY
| *A | w/o Mark Levinson Speaker System |
| *B | w/ Mark Levinson Speaker System |
Connect the speaker connector.
Temporarily install the speaker by attaching the claw of the speaker to the door panel.
Install the rear speaker assembly with the 3 screws.
Note
Do not touch the cone of the speaker.
Tech Tips
Tighten the screws in the order shown in the illustration.
INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
Connect the rear door lock remote control cable and rear door inside locking cable.
Connect each connector.
| *1 | Reference Boss |
Attach the 3 claws to install the rear door trim board to the rear door inner glass weatherstrip.
Attach the reference boss in the direction indicated by the arrow in the illustration.
Attach the 8 clips to install the rear door trim board.
Install the 3 screws.
INSTALL REAR DOOR HOLE COVER
Install the rear door hole cover.
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
Connect the connector.
Attach the 2 clips and 5 claws to install the rear power window regulator switch assembly with rear door armrest base panel.
INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH
Attach the 3 claws to install the rear door inside handle bezel plug.
CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL LUGGAGE COMPARTMENT TRIM COVER LH
Install the luggage compartment trim cover LH.
INSTALL LUGGAGE COMPARTMENT FLOOR MAT
Install the luggage compartment floor mat.