FRONT DOOR SPEAKER INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. Connect the speaker connector.

      A01FTLTE02
      Text in Illustration
      *A w/o Mark Levinson Speaker System *B w/o Mark Levinson Speaker System

    2. Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    3. Install the front No. 1 speaker assembly with the 4 screws.

      Note

      Do not touch the cone of the speaker.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Connect the front door lock remote control cable and front door inside locking cable.

    2. Connect each connector.

    3. A01FVSRE01
      Text in Illustration
      *1 Reference Boss

      Attach the 4 claws to install the front door trim board to the front door inner glass weatherstrip.

    4. Attach the reference boss in the direction indicated by the arrow in the illustration.

    5. Attach the 9 clips to install the front door trim board.

    6. Install the 3 screws.

  3. INSTALL FRONT DOOR HOLE COVER


    1. Install the front door hole cover.

  4. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. Attach the claw to install the courtesy light assembly.

  5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. Attach the 5 claws and 2 clips to install the power window regulator master switch assembly with front door armrest base panel.

  6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the front door inside handle bezel plug.

  7. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover LH.

  9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.