RADIO ANTENNA CORD INSTALLATION


  1. INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 5 clamps and install the No. 3 antenna cord sub-assembly.

      A01FQVQE01
      Text in Illustration
      *a w/ Digital Audio Broadcasting - -

    2. Connect the connectors.

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 5 clips labeled A.

      A01FSP6E02

    2. Attach the 3 clamps labeled B to the floor stud bolts.

    3. Attach the clip labeled C.

    4. Attach the 2 clips labeled D.

    5. Install the bolt labeled E.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    6. Install the bolt labeled F.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    7. Install the bolt labeled G.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    8. Connect the connectors labeled H to install the No. 2 antenna cord sub-assembly.

  4. INSTALL INNER ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR SEAT ASSEMBLY

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY RH

    Click here

  9. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  10. INSTALL ANTENNA CORD SUB-ASSEMBLY


    1. Attach the 2 clamps to install the antenna cord sub-assembly.

    2. Connect the connector.

  11. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Connect the connectors.

    2. A01FTJJ

      Insert the multi-media module receiver assembly with bracket.

      Note

      When inserting the multi-media module receiver, do not press the knobs on it.

    3. Attach the 2 claws and 2 clips.

    4. Install the multi-media module receiver assembly with bracket with the 2 screws.

  12. INSTALL UPPER CONSOLE PANEL

    A01FVW3E01
    Text in Illustration
    *1 Upper Console Panel
    *2 Upper Rear Console Panel Sub-assembly
    *3 Remote Touch Assembly

    1. Connect the connectors and attach the clamp.

    2. Attach the 9 clips to install the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.

    3. Install the 2 screws.

  13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

    2. Attach the claw to install the shifting hole cover.

      A01FQZFE01
      Text in Illustration
      *1 Shifting Hole Cover - -

  14. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel cup holder assembly.

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 5 clips and 2 guides to install the instrument panel finish panel end LH.

  16. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Attach the 5 clips and 2 guides to install the instrument panel finish panel end RH.

  17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. Connect the connector.

    2. Attach the 9 clips and guide to install the center instrument cluster finish panel.

  18. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  19. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover LH.

  20. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  21. CHECK SRS WARNING LIGHT

    Click here