AUDIO AND VISUAL SYSTEM, Diagnostic DTC:B15B8

DTC Code DTC Name
B15B8 Harddisk Malfunction

DESCRIPTION

This DTC is stored when the hard disc which is built into the multi-media module receiver assembly has an initialization malfunction or read/write errors occur more than a specified number of times.

DTC Code DTC Detection Condition Trouble Area
B15B8 Hard Disk Drive (HDD) malfunction

  • Hard disc drive (HDD)

  • Multi-media module receiver assembly

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK HARD DISC (OPERATION CHECK)


    1. A01FQ9B

      Enter the "HDD Check" screen. Refer to Check Hard Disk Drive in Operation Check Click here.

    2. Select "HDD Check" and check the result.

      OK
      "OK" is displayed.

      Tech Tips

      After "HDD Check" is selected, it may take a while until the result is displayed.


    NG

    REPLACE HARD DISC DRIVE (HDD) Click here

    OK

  2. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  3. CHECK DTC


    1. Recheck for DTCs and check if the same DTCs are output again Click here.

      OK
      No DTCs are output.

      Tech Tips

      The hard disc may be malfunctioning even if DTC B15B8 is not output.


    NG

    REPLACE HARD DISC DRIVE (HDD) Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here

  4. REPLACE HARD DISC DRIVE (HDD)


    1. Replace the Hard disc drive (HDD) with a new or normally functioning one Click here.


    NEXT

  5. CLEAR DTC


    1. Clear the DTCs Click here.


    NEXT

  6. CHECK DTC


    1. Recheck for DTCs and check if the same DTCs are output again Click here.

      OK
      No DTCs are output.

    NG

    REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here

    OK

    END (HARD DISC DRIVE [HDD] IS DEFECTIVE)