STEERING COLUMN ASSEMBLY DISASSEMBLY

Note

When using a vise, do not overtighten it.


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Using a center punch, mark the center of the 2 tapered-head bolts.

    2. Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 tapered-head bolts.

    3. A01FSG1

      Using a screw extractor, remove the 2 tapered-head bolts and steering lock actuator assembly from the steering column assembly.

  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU


    1. A01FVR0

      Remove the 2 screws and multiplex tilt and telescopic ECU.

    2. Disconnect the connector from the ECU multiplex tilt and telescopic ECU.