VARIABLE GEAR RATIO STEERING SYSTEM INITIALIZATION


  1. STEERING SENSOR INITIALIZATION

    Tech Tips


    • If the cable is disconnected from the negative (-) auxiliary battery terminal or the steering sensor connector is disconnected, the steering sensor zero point may be cleared.

    • Even when the steering sensor zero point calibration has not been performed, the master warning light does not illuminate.


    1. Turn the power switch on (READY).

    2. Slowly turn the steering wheel 360° clockwise and counterclockwise twice or three times.

    3. Drive the vehicle on a straight road at 40 km/h (25 mph) or more for 5 seconds or more.