BRAKE HOLD SWITCH INSPECTION


  1. INSPECT SATELLITE SWITCH SET (BRAKE HOLD SWITCH)


    1. A01FQRHE01
      Text in Illustration
      *a

      Component without harness connected

      (Brake Hold Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      7 (+B) - 4 (E) Brake Hold Switch ON Below 2.5 Ω
      Brake Hold Switch OFF 1 MΩ or higher

      If the result is not as specified, replace the satellite switch set (Brake hold switch).