YAW RATE AND ACCELERATION SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.


  1. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE NO. 1 CONSOLE BOX MOUNTING BRACKET


    1. A01FUWO

      Disconnect the clamp and indoor electrical key oscillator from the No. 1 console box mounting bracket.

    2. A01FTCY

      Disconnect the sensor connector.

    3. Remove the 3 bolts and No. 1 console box mounting bracket.

  3. REMOVE YAW RATE SENSOR


    1. Remove the 2 nuts and yaw rate sensor from the No. 1 console box mounting bracket.

      Note

      If the yaw rate sensor is dropped, replace it.