ELECTRONICALLY CONTROLLED BRAKE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

CUSTOMER PROBLEM ANALYSIS

1. Interview the customer and confirm the problem Click here.

   
   

   NEXT

CHECK DTC AND FREEZE FRAME DATA*

1. Check and record DTCs and Freeze Frame Data.

2. Clear the DTCs and Freeze Frame Data Click here for DTC Check/Clear, and Click here for Freeze Frame Data).

3. Reconfirm the DTCs.

   
   

   1. Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data Click here for DTC Check/Clear, and Click here for Freeze Frame Data).

      Tech Tips

      
      

      • When DTCs indicating CAN communication system malfunctions are output, repair the CAN communication system before repairing each corresponding sensor (for LHD: Click here, for RHD: Click here.

      • If any of DTCs U0123/62, U0124/95, U0126/63, and U0293/59 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit Click here.

      • If the GTS cannot communicate with the skid control ECU assembly, inspect the CAN communication system (for LHD: Click here, for RHD: Click here.

      • If there is no response from the skid control ECU assembly, inspect the IG circuit of the skid control ECU assembly Click here.

      Result
      Result Proceed to DTC is output A DTC is not output (Problem symptom does not occur) B DTC is not output (Problem symptom occurs) C

   
   

   B

   Go to step 5

   C

   Go to step 6

   A

DIAGNOSTIC TROUBLE CODE CHART

1. Proceed to Diagnostic Trouble Code Chart Click here.

   
   

   NEXT

   Go to step 7

SYMPTOM SIMULATION

1. Proceed to How to Proceed with Troubleshooting Click here.

   
   

   NEXT

PROBLEM SYMPTOMS TABLE

1. Proceed to Problem Symptoms Table Click here.

   
   

   NEXT

CIRCUIT INSPECTION*

NEXT

IDENTIFICATION OF PROBLEM

NEXT

REPAIR OR REPLACEMENT

NEXT

CONFIRMATION TEST*

NEXT