TIRE PRESSURE WARNING INITIATOR (for Front Side) INSTALLATION


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. INSTALL FRONT TIRE PRESSURE MONITOR INITIATOR


    1. Install the front tire pressure monitor initiator with the nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Connect the connector.

  3. INSTALL FRONT FENDER LINER LH


    1. Install the front fender liner LH with the 10 screws and 9 clips.

  4. INSTALL FRONT WHEEL LH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here