TIRE PRESSURE WARNING RECEIVER (for ECE-R64 Type) INSTALLATION


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Install the tire pressure warning ECU and receiver with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    2. Connect the connector.

  3. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

  4. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover.

  6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  7. REGISTER TRANSMITTER ID

    Click here

  8. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  9. PERFORM INITIALIZATION

    Click here