CHILD RESTRAINT SEAT ANCHOR BRACKET REMOVAL


  1. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    A01FRFAE01

    1. Quickly lift up the front of the rear seat cushion assembly as shown in the illustration to detach the 2 rear seat cushion lock hooks.

      Standard Measurement
      a 100 mm (3.94 in.) or less

      Note

      If the cushion is not lifted up quickly, the cushion frame will be damaged.


      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then quickly lift the bench type seat cushion assembly to detach the hook.

      2. Repeat the step above for the other hook.

    2. Detach the 2 rear hooks of the bench type rear seat cushion assembly from the bench type rear seatback assembly.

    3. A01FVQE

      w/ Seat Heater System:

      Disconnect the 2 seat cushion heater connectors.

    4. Remove the bench type rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    1. A01FTCP

      Remove the 2 bolts and child restraint seat anchor bracket sub-assembly LH.

  3. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH


    1. A01FRMM

      Remove the 2 bolts and child restraint seat anchor bracket sub-assembly RH.