REAR SEAT CUSHION HEATER INSPECTION


  1. INSPECT BENCH TYPE REAR SEAT CUSHION COVER


    1. A01FV4JE01
      Text in Illustration
      *a

      Component without harness connected

      (Bench Type Rear Seat Cushion Cover (Rear Seat Cushion Heater))

      for LH Side:

      Check the seat cushion heater.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2(AL) - 3(GND) Seat cushion heater temperature 17 to 23°C (63 to 73°F) 3.67 to 4.44 Ω
        1(TFAL) - 4(SG) Seat cushion heater temperature 25°C (77°F) 7.2 to 8.8 kΩ

        If the result is not as specified, replace the bench type rear seat cushion cover.

    2. A01FV4JE04
      Text in Illustration
      *a

      Component without harness connected

      (Bench Type Rear Seat Cushion Cover (Rear Seat Cushion Heater))

      for RH Side:

      Check the seat cushion heater.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2(AR) - 3(GND) Seat cushion heater temperature 17 to 23°C (63 to 73°F) 3.67 to 4.44 Ω
        1(TFAR) - 4(SG) Seat cushion heater temperature 25°C (77°F) 7.2 to 8.8 kΩ

        If the result is not as specified, replace the bench type rear seat cushion cover.