REAR SEAT CUSHION HEATER INSTALLATION


  1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER


    1. Using hog ring pliers, install the bench type rear seat cushion cover to the rear seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      A01FS4CE01
      Text in Illustration
      *1 Hog Ring Pliers - -
    2. A01FTRZ

      Pass the rear seat cushion heater wire harnesses through the holes in the bench type rear seat cushion cover.

    3. A01FQAW

      Pass the rear seat cushion pad through the holes in the bench type rear seat cushion cover.

    4. Pass the bench type rear seat cushion cover through the holes in the rear seat cushion pad.

    5. Using hog ring pliers, install the bench type rear seat cushion cover to the rear seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      A01FVZ1E01
      Text in Illustration
      *1 Hog Ring Pliers - -

  2. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. Attach the 4 claws to install 2 new rear seat cushion lock hooks.

  3. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY


    1. Place the bench type rear seat cushion assembly in the cabin.

    2. w/ Seat Heater System:

      Connect the 2 rear seat cushion heater connectors.

    3. Attach the 2 rear hooks of the bench type rear seat cushion assembly to the beach type rear seatback assembly.

    4. Attach the 2 front hooks to install the bench type rear seat cushion assembly.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.

  4. INSPECT REAR SEAT HEATER SYSTEM

    Click here