FRONT SEAT CUSHION HEATER (for Standard Seat Type) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

    A01FQ0TE01
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A01FQ8UE01
      Text in Illustration
      *1 Strap
      *2 Hog Ring Pliers

      Using hog ring pliers, connect the 3 straps to the separate type front seat cushion pad with new hog rings.

      Note

      Be careful not to damage the cover.

  2. INSTALL SEAT CUSHION COVER WITH PAD


    1. Set the seat cushion cover with pad in place.

    2. Attach the hooks to install the seat cushion cover with pad.

    3. for Front Passenger Side:

      Connect the connector.

    4. Install the 4 clips.

    5. Connect the connector and install the connector lock to the seat heater control sub-assembly LH connector.

    6. Connect the 2 connectors.

    7. Install the clip.

    8. Attach the hook to connect the rubber band.

    9. Connect the rubber band with the clip.

  3. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. A01FU44E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Connect each connector and each clamp.

  4. INSTALL FRONT POWER ADJUSTER SHIELD LH


    1. Install 2 new clips to the front power adjuster shield LH.

    2. for Driver Side:

      Connect the 3 connectors.

    3. for Front Passenger Side:

      Connect the 2 connectors.

    4. Attach the 2 clips to install the front power adjuster shield LH.

    5. Install the 2 screws.

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH


    1. Attach the hook to install the front seat inner cushion shield LH.

    2. Attach the 3 guides and 3 hooks.

    3. Install the screw.

  6. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. Attach the hook to install the front seat cushion shield LH.

    2. Attach the 2 guides and 3 hooks.

    3. Install the 2 screws.

  7. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH


    1. Attach the 2 clips and 2 claws to install the front seat inner No. 1 cushion shield LH.

    2. Install the screw.

  8. INSTALL FRONT SEAT ASSEMBLY

    Click here

  9. CHECK SRS WARNING LIGHT

    Click here

  10. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  11. INSPECT SEAT HEATER SYSTEM

    Click here

  12. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

  13. INSPECT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here

  14. ENABLE AUTOAWAY/RETURN FUNCTION (w/ Memory)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.