FRONT SEAT CUSHION HEATER (for Standard Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD LH

    A01FUE8

    1. Remove the screw.

    2. Detach the 2 claws and 2 clips and remove the front seat inner No. 1 cushion shield LH.

  3. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01FVGPE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 3 claws and 2 guides.

    3. Detach the hook and remove the front seat cushion shield LH.

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A01FQ4KE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the screw.

    2. Detach the 3 claws and 3 guides.

    3. Detach the hook and remove the front seat inner cushion shield LH.

  5. REMOVE FRONT POWER ADJUSTER SHIELD LH

    A01FSTM

    1. Remove the 2 screws.

    2. Detach the 2 clips and remove the front power adjuster shield LH.

    3. A01FUR0

      for Driver Side:

      Disconnect the 3 connectors.

    4. A01FVTP

      for Front Passenger Side:

      Disconnect the 2 connectors.

    5. A01FQV6

      Remove the 2 clips from the front power adjuster shield LH.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. Disconnect each connector and each clamp.

    2. A01FTO9

      Remove the nut and front seat inner belt assembly LH.

  7. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01FTZM

      Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A01FUIKE01

      Disconnect the 2 connectors.

    5. Remove the connector lock from the seat heater control sub-assembly LH connector and disconnect the connector.

      Text in Illustration
      *1 Connector Lock

    6. Using a clip remover, remove the 4 clips.

      A01FS5Y
    7. A01FTRL

      for Front Passenger Side:

      Disconnect the connector.

    8. Detach the hooks and remove the seat cushion cover with pad.

  8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01FUT1E01
      Text in Illustration
      *1 Strap

      Remove the hog rings and disconnect the 3 straps from the separate type front seat cushion pad.

    2. A01FRAM

      Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.