FRONT SEATBACK HEATER (for Sports Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH


    1. A01FTZM

      Using a clip remover, remove the clip and disconnect the rubber band.

    2. Detach the hook and disconnect the rubber band.

    3. Using a clip remover, remove the clip.

    4. A01FSUB

      Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.

    5. Push and slide the front seatback board subassembly LH to detach the claw.

      Tech Tips

      Use the same procedure to detach the claw on the other side.

    6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.

  3. REMOVE SEATBACK COVER WITH PAD (for Driver Side)

    A01FVGR

    1. Disconnect the connector.

    2. A01FTP9

      Detach the hooks.

    3. A01FTAP

      Detach the wire harness clamp.

    4. A01FPY1

      Detach the 4 claws and remove the 2 front seat headrest supports.

    5. A01FVY8E01

      Detach the wire harness clamp.

    6. Remove the 2 nuts and detach the seatback cover bracket.

      Text in Illustration
      *1 Seatback Cover Bracket

    7. Remove the seatback cover with pad.

  4. REMOVE SEATBACK COVER WITH PAD (for Front Passenger Side)

    A01FVAY

    1. Disconnect the connector.

    2. A01FQQC

      Detach the hooks.

    3. A01FSWI

      Detach the 4 claws and remove the 2 front seat headrest supports.

    4. A01FQRSE01

      Detach the wire harness clamp.

    5. Remove the 2 nuts and detach the 2 seatback cover brackets.

      Text in Illustration
      *1 Seatback Cover Bracket

    6. Remove the seatback cover with pad.

  5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Driver Side)


    1. A01FSV0

      Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.

  6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER (for Front Passenger Side)


    1. A01FS27

      Pass the 2 seatback cover brackets through the 2 holes of the separate type front seatback pad.

    2. A01FQ84

      Remove the hog rings and separate type front seatback cover from the separate type front seatback pad.