Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL
| *1 | Protective Tape |
Put protective tape around the center instrument cluster finish panel.
Detach the 9 clips and guide.
Disconnect the connector and remove the center instrument cluster finish panel.
REMOVE INSTRUMENT PANEL FINISH PANEL END LH
| *1 | Protective Tape |
Put protective tape around the instrument panel finish panel end LH.
Detach the 5 clips and 2 guides and remove the instrument panel finish panel end LH.
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
| *1 | Protective Tape |
Put protective tape around the instrument panel finish panel end RH.
Detach the 5 clips and 2 guides and remove the instrument panel finish panel end RH.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
REMOVE UPPER CONSOLE PANEL
| *1 | Upper Console Panel |
| *2 | Upper Rear Console Panel Sub-assembly |
| *3 | Remote Touch Assembly |
Remove the 2 screws.
Detach the 9 clips.
Disconnect the connectors, detach the clamps, and remove the upper console panel together with the upper rear console panel sub-assembly and remote touch assembly.
REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY
Detach the 4 clips.
Disconnect the connector and remove the instrument panel cup holder assembly.
REMOVE REFRESHING SEAT SWITCH
| *1 | Protective Tape |
Using a screwdriver, detach the 8 claws and remove the refreshing seat switch from the instrument panel cup holder assembly.
Tech Tips
Tape the screwdriver tip before use.