LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Standard Seat Type) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. Slide the lumbar support adjuster assembly LH downward to attach the 2 hooks and install it.

    2. Install the 2 bolts.

    3. Attach the 2 clips and install the 2 springs.

    4. Connect the connector.

  2. INSTALL SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)


    1. Attach the hook to install the seatback climate control blower LH together with the rear air duct LH.

    2. Install the 2 screws.

    3. Attach the 2 claws to connect the rear air duct LH to the lumbar support adjuster assembly LH.

    4. Connect the connector.

  3. INSTALL SEATBACK COVER WITH PAD


    1. Install the seatback cover with pad.

    2. A01FTDUE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Attach the 2 seatback cover brackets with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:

      After the seatback cover bracket is attached, make sure the seatback cover bracket is not twisted.

    3. Attach the wire harness clamp.

    4. Attach the 4 claws to install the 2 front seat headrest supports.

    5. Attach the hooks.

    6. w/ Seat Heater System:

      Connect the connector.

  4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    A01FUWV

    1. Slide the front seatback board sub-assembly LH upward to attach the 2 hooks and install it.

    2. Attach the 2 claws.

    3. Open the lower part of the front seatback board sub-assembly LH and install the 2 screws.

    4. Install the clip.

    5. Attach the hook to connect the rubber band.

    6. Connect the rubber band with the clip.

  5. INSTALL FRONT SEAT ASSEMBLY

    Click here

  6. CHECK SRS WARNING LIGHT

    Click here

  7. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  8. INSPECT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here

  9. INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here

  10. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

  11. ENABLE AUTOAWAY/RETURN FUNCTION (w/ Memory)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.