LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Standard Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips

Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

REMOVE FRONT SEAT ASSEMBLY

Click here
REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH
1. Using a clip remover, remove the clip and disconnect the rubber band.
2. Detach the hook and disconnect the rubber band.
3. Using a clip remover, remove the clip.
4. Open the lower part of the front seatback board sub-assembly LH and remove the 2 screws.
5. Push and slide the front seatback board subassembly LH to detach the claw.
  
  Tech Tips
  
  Use the same procedure to detach the claw on the other side.
6. Slide the front seatback board sub-assembly LH downward to detach the 2 hooks and remove it.
REMOVE SEATBACK COVER WITH PAD
1. w/ Seat Heater System:
  
  Disconnect the connector.
2. Detach the hooks.
3. Detach the 4 claws and remove the 2 front seat headrest supports.
4. Text in Illustration
  
  *1 Seatback Cover Bracket
  
  Detach the wire harness clamp.
5. Remove the 2 nuts and detach the seatback cover bracket.
6. Remove the seatback cover with pad.
REMOVE SEATBACK CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)
1. Disconnect the connector.
2. Detach the 2 claws and disconnect the rear air duct LH from the lumbar support adjuster assembly LH.
3. Remove the 2 screws.
4. Detach the hook and remove the seatback climate control blower LH together with the rear air duct LH.
REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
1. Disconnect the connector.
2. Remove the 2 springs and detach the 2 clips.
3. Remove the 2 bolts.
4. Slide the lumbar support adjuster assembly LH upward to detach the 2 hooks and remove it.