POWER SEAT SWITCH (for Luxury Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT INNER NO. 1 CUSHION SHIELD LH

    A01FU9R

    1. Remove the screw.

    2. Detach the 2 claws and 2 clips and remove the front seat inner No. 1 cushion shield LH.

  3. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01FVGPE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 3 claws and 2 guides.

    3. Detach the hook and remove the front seat cushion shield LH.

  4. REMOVE POWER SEAT SWITCH KNOB LH (for Slide)

    A01FSDBE01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 4 claws and remove the power seat switch knob LH.

  5. REMOVE POWER SEAT SWITCH KNOB LH (for Reclining)

    A01FQI8E01
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using moulding remover A, detach the 3 claws and remove the power seat switch knob LH.

  6. REMOVE FRONT POWER ADJUSTER SHIELD LH

    A01FSTM

    1. Remove the 2 screws.

    2. Detach the 2 clips and remove the front power adjuster shield LH.

    3. A01FT8B

      Disconnect the connector.

    4. A01FS3Y

      Remove the 4 screws and switch bezel from the front power adjuster shield LH.

    5. A01FQV6

      Remove the 2 clips from the front power adjuster shield LH.

  7. REMOVE POWER SEAT SWITCH ASSEMBLY

    A01FRKM

    1. Remove the 3 screws and 3 nuts.

    2. Detach the 2 claws and remove the power seat switch assembly from the switch bezel.