REAR SEAT ASSEMBLY DISASSEMBLY


  1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    1. Remove the hog rings.

      A01FQT0
    2. A01FSB8

      Pass the bench type rear seat cushion cover through the holes in the rear seat cushion pad.

    3. Pass the rear seat cushion pad through the holes in the bench type rear seat cushion cover.

    4. A01FVUT

      w/ Seat Heater System:

      Pass the rear seat cushion heater wire harnesses through the holes in the bench type rear seat cushion cover.

    5. Remove the hog rings and bench type rear seat cushion cover from the rear seat cushion pad.

      A01FRZQ

  2. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. for Luxury Seat Type:


      1. A01FSL3

        w/o Seat Heater System:

        Disconnect the connector and detach the clamp of the rear console box wire.

      2. A01FS6H

        w/ Seat Heater System:

        Disconnect the connector, detach the clamp of the rear console box wire and detach the 3 clamps of the rear seat wire RH.

      3. A01FQ6R

        Position the rear console box wire as shown in the illustration.

    2. A01FUEA

      Remove the 2 nuts.

    3. Move the rear seat center armrest assembly in the direction of the arrow to detach the 2 hooks and remove the rear seat center armrest assembly.

  3. REMOVE REAR SEAT CENTER ARMREST HINGE


    1. A01FSA8

      Remove the 2 screws, 2 bushes and rear seat center armrest hinge.

  4. REMOVE REAR SEAT ARMREST HOLE BOARD SUB-ASSEMBLY


    1. A01FRY7

      for Luxury Seat Type:

      Detach the clamp of the rear console box wire.

    2. A01FUPL

      Detach the 2 hooks.

    3. A01FSBO

      Using a clip remover, remove the 2 clips and rear seat armrest hole board sub-assembly.

  5. REMOVE REAR SEAT HOOK (for Luxury Seat Type)


    1. A01FSM7

      Remove the screw and rear seat hook.

  6. REMOVE CUSHION


    1. A01FSWM

      Remove the 2 cushions from the rear seat armrest hole board sub-assembly.

  7. REMOVE NO. 1 SEAT ARMREST CAP


    1. A01FSIA

      Detach the 4 claws and 4 guides, and remove the No. 1 seat armrest cap.

  8. REMOVE REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY

    A01FQD6

    1. Remove the 2 screws.

    2. Detach the claw and remove the rear seat center armrest door sub-assembly.

  9. REMOVE REAR NO. 1 SEAT CENTER ARMREST PLATE

    A01FVJB

    1. Remove the 4 screws and rear No. 1 seat center armrest plate.

  10. REMOVE CENTER ARMREST LOCK SUB-ASSEMBLY


    1. A01FRFN

      Remove the 4 screws and center armrest lock sub-assembly.

  11. REMOVE ARMREST CONSOLE HINGE SUB-ASSEMBLY


    1. A01FVAE

      Remove the 2 screws and armrest console hinge sub-assembly.

  12. REMOVE REAR SEAT CENTER ARMREST PANEL SUB-ASSEMBLY

    A01FR09

    1. Remove the screw.

    2. Detach the 6 claws and 3 guides.

    3. A01FSDM

      for Luxury Seat Type:

      Disconnect the rear console box wire connector.

    4. Remove the rear seat center armrest panel sub-assembly.

  13. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY


    1. A01FUIX

      Detach the 4 claws and remove the rear seat center armrest box assembly.

  14. REMOVE REAR CONTROL SWITCH (for Luxury Seat Type)


    1. A01FS2K

      Detach the 4 claws and remove the rear control switch.

  15. REMOVE REAR CONSOLE BOX WIRE (for Luxury Seat Type)


    1. A01FS8G

      Detach the 3 clamps and remove the rear console box wire.

  16. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY


    1. A01FSN6

      Remove the 2 screws and rear seat center armrest cup holder sub-assembly.

  17. REMOVE REAR SEAT CENTER ARMREST BOX (for Luxury Seat Type)


    1. A01FSFF

      Detach the 30 hooks and remove the rear seat center armrest cover sub-assembly.

    2. A01FUKM

      Remove the rear seat center armrest box from the rear seat center armrest pad.

  18. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Tech Tips

    Use the same procedure for the other seat heater control sub-assembly.


    1. A01FT9D

      Using a screwdriver, detach the claw and separate the seat heater control sub-assembly.

    2. A01FV3U

      Using a screwdriver, detach the claw and disconnect the rear seatback heater connector to remove the seat heater control sub-assembly.

  19. REMOVE REAR SEAT WIRE RH (for Luxury Seat Type)


    1. A01FSTN

      w/o Seat Heater System:

      Detach the 2 clamps and claw, and remove the rear seat wire RH.

    2. A01FTTX

      w/ Seat Heater System:


      1. Disconnect the 2 rear seatback heater connectors.

      2. Pass the rear seat wire RH under the rubber bands of the bench type rear seatback cover.

      3. Detach the 3 clamps and claw, and remove the rear seat wire RH.

  20. REMOVE REAR SEAT SHOULDER BELT GUIDE RH


    1. A01FTVA

      Remove the 3 screws and rear seat shoulder belt guide RH.

  21. REMOVE REAR SEAT SHOULDER BELT GUIDE LH

    Tech Tips

    Use the same procedure described for the RH side.

  22. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE


    1. A01FQ0C

      Remove the 2 screws and rear seat center shoulder belt guide.

  23. REMOVE REAR SEAT HEADREST SUPPORT


    1. A01FS0O

      Remove the hog rings.

    2. A01FQC8

      Detach the 12 claws and remove the 6 rear seat headrest supports.

  24. REMOVE BENCH TYPE REAR SEATBACK COVER


    1. Remove the hog rings.

    2. Pass the bench type rear seatback cover through the holes in the bench type rear seatback pad.

    3. Pass the bench type rear seatback pad through the holes in the bench type rear seatback cover.

      A01FUN7
    4. A01FQ40

      w/ Seat Heater System:

      Pass the rear seatback heater wire harnesses through the holes in the bench type rear seatback cover.

    5. w/ Rear Seat Side Airbag:


      1. Remove the rear seat airbag assembly LH Click here.

      2. Remove the rear seat airbag assembly RH.

        Tech Tips

        Use the same procedure described for the LH side.

      3. A01FRA1

        Pass the brackets of the bench type rear seatback cover through the holes in the bench type rear seatback pad.

    6. Remove the hog rings and bench type rear seatback cover from the bench type rear seatback pad.

      A01FTYY