PRE-CRASH SAFETY SYSTEM CANCEL SWITCH INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY


    1. Attach the 2 claws to install the pre-crash system cancel switch assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connectors and attach the clamp.

    2. Attach the 2 claws to install the No. 1 instrument panel under cover sub-assembly.

    3. Install the 3 screws <A>.