PRE-CRASH SAFETY SYSTEM CANCEL SWITCH REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01FVMJ

    1. Remove the 3 screws <A>.

    2. Detach the 2 claws.

    3. Disconnect the connectors, detach the clamp and remove the No. 1 instrument panel under cover sub-assembly.

  2. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY


    1. A01FUD0

      Detach the 2 claws and remove the pre-crash system cancel switch assembly.