DRIVER MONITOR CAMERA INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL DRIVER MONITOR CAMERA


    1. Attach the 2 claws to temporarily install the driver monitor camera to the upper steering column cover.

    2. Install the 2 screws.

  2. INSTALL DRIVER MONITOR BRACKET


    1. Attach the claw to temporarily install the driver monitor bracket.

    2. Install the driver monitor bracket with the screw.

      Torque:
      1.8 N*m  { 18 kgf*cm, 16 in.*lbf }

  3. INSTALL STEERING COLUMN COVER


    1. Connect the connector.

    2. Attach the 2 claws to install the steering column upper cover.

    3. Attach the 4 clips.

    4. Attach the 2 claws to install the steering column lower cover.

      Note

      Do not damage the tilt and telescopic switch.

    5. Install the 3 screws.

  4. ENABLE AUTO AWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.