SEAT BELT CONTROL ECU INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL SEAT BELT CONTROL ECU


    1. Install the seat belt control ECU to the parking brake ECU assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 2 connectors.

    3. Connect the No. 1 junction block assembly to the parking brake ECU assembly with the 2 nuts.

    4. Attach the clamp.

    5. Connect the parking brake ECU assembly to the vehicle body with the 2 nuts.

  2. INSTALL FUEL LID WITH LOCK MOTOR ASSEMBLY

    Click here