DESCRIPTION
The compressor with motor assembly monitors the control power voltage in the circuit. It stops the compressor circuit and stores the DTC B1477/77 when the monitored voltage is outside the specified range.
This DTC will be stored as a history DTC. Compressor control may not resume unless the power switch is turned off.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1477/77 | An open or short to ground in the inverter control power voltage circuit. |
|
INSPECTION PROCEDURE
Note
The hybrid control system and air conditioning system output DTCs separately. Inspect DTCs following the diagnosis procedure for the hybrid control system first if any DTCs from those systems are output simultaneously Click here.
PROCEDURE
CHECK FOR DTC
Clear the DTCs Click here.
Check the DTCs Click here.
| OK |
|---|
| DTC B1477/77 is not output |
| NG |
|
CHECK CAN COMMUNICATION SYSTEM Click here |
| OK |
|
USE SIMULATION METHOD TO CHECK Click here
CHECK CAN COMMUNICATION SYSTEM
Use the GTS to check if the CAN communication system is functioning normally.
for LHD: Click here.
for RHD: Click here.
| Result | Proceed to |
|---|---|
| CAN DTC is not output | A |
| CAN DTC is output (for LHD) | B |
| CAN DTC is output (for RHD) | C |
| B |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| C |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| A |
|
REPLACE COMPRESSOR WITH MOTOR ASSEMBLY Click here