REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
REMOVE FUEL SENDER GAUGE ASSEMBLY
Disconnect the fuel sender gauge connector.
Push the claw labeled A of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.
Note
Do not touch the resistance plate or contacts of the fuel sender gauge assembly.
Do not bend the arm of the fuel sender gauge assembly.
REMOVE JET PUMP
Detach the claw and remove the jet pump nozzle.
| *a | Protective Tape |
Using a clip remover with the tip taped, remove the jet pump from the No. 1 fuel sub-tank.
| *1 | Jet Pump |
| *2 | O-Ring |
Remove the O-ring from the jet pump.
REMOVE FUEL PUMP HARNESS
Disconnect the fuel pump connector from the fuel pump assembly.
REMOVE NO. 1 FUEL SUCTION SUPPORT
Detach the 2 claws and remove the No. 1 fuel suction support.
REMOVE FUEL PUMP WITH FILTER ASSEMBLY
Using a screwdriver with the tip taped, detach the 5 claws and remove the fuel filter assembly from the fuel with filter pump assembly.
| *1 | O-Ring |
| *2 | Fuel Pump Spacer |
Remove the O-ring and fuel pump spacer from the fuel with filter pump assembly.
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
Using a screwdriver with its tip wrapped with protective tape, remove the fuel pressure regulator assembly.
Note
Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the fuel pressure regulator assembly and the fuel filter.
| *1 | O-ring |
Remove the 2 O-rings from the fuel pressure regulator assembly.