FUEL INJECTOR (for Port Injection) INSTALLATION

INSTALL FUEL INJECTOR ASSEMBLY

1. Apply a light coat of spindle oil or gasoline to new O-rings, and install them to each fuel injector assembly.

   Note

   Check that there is no damage or foreign matter in the grooves of the fuel injector assembly when installing the fuel injector assembly O-rings.

2. 

   Text in Illustration

   *a	Claw
   *b	Plastic Stopper

   Install the 4 fuel injector assemblies to the fuel delivery pipe.

   Note

   
   

   • Make sure that the fuel injector assembly is located within the plastic stopper range as shown in the illustration.

   • Check that there is no damage or foreign matter on the fuel injector assembly installation holes.

   • When installing the O-rings, make sure they do not become pinched or cut.

INSTALL FUEL DELIVERY PIPE

1. Install 4 new injector vibration insulators to the cylinder head sub-assembly.

2. Install the 2 No. 1 delivery pipe spacers to the cylinder head sub-assembly.

3. Install the fuel delivery pipe together with the 4 fuel injector assemblies with the 2 bolts.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

   Note

   Be careful not to drop the fuel injector assemblies when installing the fuel delivery pipe.

4. Connect the 4 fuel injector assembly connectors.

5. Connect the No. 6 engine wire connector.

6. Connect the 3 wire harness clamps to the fuel delivery pipe and wire harness clamp bracket.

CONNECT FUEL TUBE SUB-ASSEMBLY

1. Connect the fuel tube sub-assembly to the fuel delivery pipe Click here.

INSTALL NO. 1 FUEL PIPE SUB-ASSEMBLY

Click here

INSPECT FOR FUEL LEAK

Click here