REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE HYBRID VEHICLE TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION INPUT DAMPER COVER ASSEMBLY


    1. A01FVWQE01

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A01FVPN

      Remove the 9 bolts and transmission input damper cover assembly.

  3. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A01FR3T

      Remove the 8 bolts and flywheel sub-assembly.

  4. REMOVE REAR ENGINE OIL SEAL


    1. A01FS7XE01
      Text in Illustration
      *1 Cut Position
      *2 Protective Tape

      Using a knife, cut through the oil seal lip.

    2. Using a screwdriver with its tip taped, pry out the oil seal.

      Note

      After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.