REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE HYBRID VEHICLE TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE TRANSMISSION INPUT DAMPER ASSEMBLY


    1. A01FSNJE01

      Using SST, hold the crankshaft pulley assembly.

      SST
      09213-54015
      09330-00021

      Tech Tips

      SST (Crankshaft pulley holding tool) fixing bolt part No.: 91551-80650 (2 pcs)

    2. A01FUTR

      Remove the 6 bolts and transmission input damper assembly.

  3. REMOVE FLYWHEEL SUB-ASSEMBLY


    1. A01FSNJE01

      Using SST, hold the crankshaft pulley assembly.

      SST
      09213-54015
      09330-00021

      Tech Tips

      SST (Crankshaft pulley holding tool) fixing bolt part No.: 91551-80650 (2 pcs)

    2. A01FS7V

      Remove the 8 bolts and flywheel sub-assembly.

  4. REMOVE REAR ENGINE OIL SEAL


    1. A01FSLXE02
      Text in Illustration
      *a Protective Tape
      *b Cut Position

      Using a knife, cut off the lip of the rear engine oil seal.

    2. Using a screwdriver, pry out the rear engine oil seal.

      Note

      Do not damage the surface of the press fit hole or the crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.