ACCELERATOR PEDAL SENSOR REMOVAL


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01FVMJ

    1. Remove the 3 screws <A>.

    2. Detach the 2 claws.

    3. Disconnect the connectors, detach the clamp and remove the No. 1 instrument panel under cover sub-assembly.

  2. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid excessive force to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01FSK8

      Disconnect the accelerator pedal sensor connector.

    2. Remove the 2 bolts and accelerator pedal sensor.

  3. REMOVE ACCELERATOR PEDAL


    1. A01FUWLE01
      Text in Illustration
      *1 Accelerator Pedal
      *2 Accelerator Pedal Support Bracket
      *3 Spring
      A01FTNO Wiggle
      A01FRJI Pull
      A01FRV5 Front of Vehicle

      Detach the 3 claws and remove the accelerator pedal.

      Tech Tips

      While wiggling the tip of the accelerator pedal to the left and right, lift the accelerator pedal upwards and remove it from the bracket.