DESCRIPTION
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A95 | 123 | Voltage between VB3 and VB4 terminals is below the standard despite the interlock switch being engaged (1 trip detection) |
|
WIRING DIAGRAM
INSPECTION PROCEDURE
CAUTION:
When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.
PROCEDURE
CHECK FOR DTCS (HYBRID CONTROL)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Read output DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Turn the power switch off.
| B |
|
GO TO DTC CHART (P0AFC-123) Click here |
| A |
|
CHECK SERVICE PLUG GRIP
Remove the service plug grip Click here.
Measure the resistance according to the value(s) in the table below.
| Standard Resistance | ||||||
|---|---|---|---|---|---|---|
|
| NG |
|
REPLACE SERVICE PLUG GRIP Click here |
| OK |
|
REPLACE HV BATTERY Click here
REPLACE SERVICE PLUG GRIP
Replace the service plug grip Click here.
| NEXT |
|
RECONFIRM DTC OUTPUT (HYBRID CONTROL)
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Read output DTCs Click here.
| Result | ||||||
|---|---|---|---|---|---|---|
|
Disconnect the GTS from the DLC3.
| B |
|
GO TO DTC CHART (HYBRID CONTROL SYSTEM) Click here |
| A |
|
RECOVERY TO NORMAL